How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a new samsung dryer #dv5471a and my husband leaned on

Resolved Question:

I have a new samsung dryer #dv5471a and my husband leaned on it while installing laundry cupboards. Can the top open to repair those squats?
Submitted: 5 years ago.
Category: Appliance
Expert:  Bryan replied 5 years ago.

Hi,Welcome to Just Answer, My name is XXXXX XXXXX forward to helping you today.

 

Yes the top can be lifted on this, there are two clips around 4 to 5 inches in from each side between the top and the front panel number 2-5 on this diagram, unplug the machine is in use a putty knife to slide in between the top and the front panel and push these clips in and lift the top up and it will lean back, you should be able to pop the dense out or whatever is broken or bent on it by doing that, I hope this helps, thanks, Bryan

Bryan and 2 other Appliance Specialists are ready to help you
Customer: replied 5 years ago.
Bryan I am not able to view the full image ,when I click on view full image nothing happens ,it's not enlarging or anything .
Expert:  Bryan replied 5 years ago.
okay I'll give you the link to all the diagram you can open them there . heres the link , diagrams that has all the diagrams, thanks Bryan
Customer: replied 5 years ago.

Bryan I am not able to view the full image ,when I click on view full image nothing happens ,it's not enlarging or anything .

 

 

 

 

Ok ,thank you my husband was able to get the top up ,,thanks again so much.

Expert:  Bryan replied 5 years ago.
Your very welcome, tell him good job ! And have a great weekend, thanks, Bryan

Related Appliance Questions