Thankyou for using David, The Famous Forry on Just Answer
Has your machine been particulary noisey on the final spin lately?
No has been ok had the mod drum & bearings fitted when it was 18 months old machine now over ten yrs old
If you set to a rinse and spin cycle does your machine fill with water, then empty, but with no drum rotation?
fills & emptys & drum turns when on spin cycle turns at regular speed & spin light flashes , have tried with no load in drum then spins but not at full speed
This may be your motor brushes worn. Are you able to remove the motor and check for wear?
yes but not at this monment in time
Ok come back when your ready and I will take you through it step by step.
that may not be today it will most probably be tomorrow is that a problem
No come back whenever you want. I am here most days as often as possible so I will look for your return.
Your welcome******Happy New Year****** to you.
Hi have taken out the motor
is there a sensor on the rear of the motor which measures its speed
There is a device called a tachometer that regulates the speed in line with the module control card