How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask JCCARVER Your Own Question
JCCARVER
JCCARVER, appliance doctor
Category: Appliance
Satisfied Customers: 608
Experience:  25 years experience
61676714
Type Your Appliance Question Here...
JCCARVER is online now
A new question is answered every 9 seconds

I have a GE profile dishwasher thats not draining. I made sure

Customer Question

I have a GE profile dishwasher thats not draining. I made sure the drain pipe has a high loop, and I removed the drain screen inside. There was a pair of grinder teeth (similar to a garbage disoposal) attached to a threaded piece of metal just laying in the bottom. Any suggestions?
Submitted: 5 years ago.
Category: Appliance
Expert:  JCCARVER replied 5 years ago.
Can you get the water to drain at all in any cycle?
Customer: replied 5 years ago.
It wont drain in any cycle
Expert:  JCCARVER replied 5 years ago.
Can you hear a load clunk at the beginning of the drain cycle ?
Customer: replied 5 years ago.
Yes there is a deffinant clunk sound
Expert:  JCCARVER replied 5 years ago.

Then the drain solenoid is going out .

Remove the bottom front panel and replace the drain solenoid it should fix the no drain problem.

Customer: replied 5 years ago.
pLEASEdescribe the solenoid. Im A CARPENTER NOT A MECHANIC
Expert:  JCCARVER replied 5 years ago.
The solenoid is attached to the main pump
JCCARVER and 2 other Appliance Specialists are ready to help you
Customer: replied 5 years ago.
Thanks, XXXXX XXXXX it a shot
Expert:  JCCARVER replied 5 years ago.
no problem

Related Appliance Questions