How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Hi - Have a Kenmore electric range - Model # XXXXX -

Resolved Question:

Hi - Have a Kenmore electric range - Model # XXXXX - it went dead yesterday - it looks like the bottle element burnt out so we replace it.

Now we are getting an F1 signal and beeping - we tried the cancel as it says in the manual but it keeps come back Also the oven is on lock and cannot open door although it does not appear that the heat is on.

The manuel says to reset the control but no instructions as how to do this
HELP

Thank you
Submitted: 4 years ago.
Category: Appliance
Expert:  Bryan replied 4 years ago.

Hi,Welcome to Just Answer, My name is XXXXX XXXXX forward to helping you today.

 

Unfortunately this is a bad code to get, it means the control has failed>

F1Circuit board defectiveReplace control board

 

You will need to order and replace the control board which is actually the clock, you are in Canada so you will need to find a local supplier there in order it through them , most US suppliers don't care the part and don't ship out of the US, I hope this helps, thanks, Bryan

Bryan and 2 other Appliance Specialists are ready to help you

Related Appliance Questions