Hello I will be helping you so please stay on line with me until we finish, i will try not to take up to much time ,, thanksLE is for leak There is a sensor in the tray under the dishwasher . You need to look in there and check if it is wet. If it is you need to dry it out and then check to see if it is leaking.The code "LE" stands for leakage error. If this code is displaying, your dishwasher may require service to repair the leak. The best thing to do when this error message displays is to contact Samsung customer support immediately to prevent complications from leaking water.
It had a 9e code and I removed and cleaned out the area where the water comes in and shoots up water. I remove a piece from there and the water that was left leaked out. How do I get at the tray. I removed the bottom kick panel.