Hi,Welcome to Just Answer, My name is XXXXX XXXXX forward to helping you today.
Do you have a full model number on this ? Can you get that to us? This is saying ERA service, on the control?
Reading Error Codes
1. Wake the washer up by pressing any button (except
the cancel button).
2. Press and hold the CANCEL and START buttons
simultaneously for 6 seconds. The failure code will
appear in the display as an "E" followed by two numbers
EAE - line safe relay sensing failure
Have the power company check the frequency and
voltage of the incoming power
If correct, for error code E5C, replace the motor control
board. If correct, for error codes EA1, EA2, EA3, EAE or
EA5, replace the main control board
hope this helps, thanks Bryan