How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 20092
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

I have a Kenmore Tumble Action Washer Model No. 417 and it

This answer was rated:

I have a Kenmore Tumble Action Washer Model No. 417 and it is not draining properly. I have removed the front panel and the drain hose is not kinked. Any ideas?

Hi, thanks for using JustAnswer.com. Please remember, I do not get paid for my time and expertise until you accept. In the large, black rubber hose that leads from the tub to the pump is a plastic filter that often times gets plugged. You will be able to feel the filter if you squeeze the tube. If you post the model number I can get you more accurate information.

 

Kelly

Customer: replied 5 years ago.
I think it is model number 417
There should be 8 more numbers after the 417...
Customer: replied 5 years ago.
where would I find that number?
Customer: replied 5 years ago.
XXXXXXXXXXX

Inside the door on a small white sticker. Please post only the last 8 after the 417.

Customer: replied 5 years ago.
44252500

Inside the number 41 hose is that filter. You will need to remove the large clamp around the top of that rubber hose to access it. Be sure to remember exactly where it went in the hose.

 

Kelly and other Appliance Specialists are ready to help you