How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Whrlp Master Tech Your Own Question
Whrlp Master Tech
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 9060
Experience:  30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
Type Your Appliance Question Here...
Whrlp Master Tech is online now
A new question is answered every 9 seconds

Same question, exactly what is happening to me, it is skipping

This answer was rated:

Same question, exactly what is happening to me, it is skipping the steaming. It also does the same with the blinking blue light. And also happened AFTER a cleaning with vinegar cycle. I don't know about where and how to clean the sensors.

Not sure what you are talking about (same thing happening to me )

I only get to see your question .

May I get your units Model number to better assist you?


Customer: replied 4 years ago.

Sorry, I had read a prior similar problem.

Model LRF4001RY

After I "cleaned" the system with vinegar, it stop working correctly. Now after it starts, it does not "steam" like it used to, and the blue light begins flashing.

What can I do? is there a solution that I can try?

Thanks you



Whom is the manufacture?
Customer: replied 4 years ago.
Whirlpoor fabric Refreshener

Ok you can try running another vinagar cycle .

I suspect that the last cycle loosened deposits and now it is clogged. Hopefully that will break them up so it will work.

But Unfortunatly this is considered as a disposable unit .

There are not even replacement part available

Whrlp Master Tech and 3 other Appliance Specialists are ready to help you

Related Appliance Questions