How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Dear GE Techs: My GE Profile, Model PSS26MSWCSS, Ser AR430186,

This answer was rated:

Dear GE Tech's:
My GE Profile, Model PSS26MSWCSS, Ser AR430186, Appears to be stuck in a Defrost Mode on the Frig side only, Temp Reading on Display is Freezer -1, Frig 89. This happened some time in the middle of last night.
Qusetion does this unit have a Defrost relay that could be stuck? Does it have a Mechanical defrots timer or computer controlled defrost?

Hi,Welcome to Just Answer, My name is XXXXX XXXXX forward to helping you today.


this has a defrost control board, its actually the mother board, if you pull the refrigerator away from the wall there an 8X10 " cover on the back, its located behind that cover, you can order this @ G.E. had to redesign these 4 times because of failure. thanks, Bryan

Customer: replied 4 years ago.

Wow that looks full of relays, Thanks Bryan...

My Wife is reminding me that a month ago this same unit started leaking water from the right side underneath the Frig, so i shut off the Supply valve, & Forgot about it. Of course the Ice Maker & Filter system has been down. what can i do about this issue?

was it the right side looking from the back or the front of the refrigerator?
Customer: replied 4 years ago.
Right Side Viewing from the Front...

most likely the water inlet valve or one of the plastic lines, the valve is # XXXXX


Bryan and other Appliance Specialists are ready to help you
Customer: replied 4 years ago.

Thanks for All your Help...

Have a good Weekend,



thank you and you also have a great weekend. Bryan

Related Appliance Questions