How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Charles Your Own Question
Charles
Charles, Engineering Contractor
Category: Appliance
Satisfied Customers: 2066
Experience:  Install, repair and trouble shoot
26609390
Type Your Appliance Question Here...
Charles is online now
A new question is answered every 9 seconds

Can I reset my whirlpool gold quiet partner III dishwasher

Customer Question

Can I reset my whirlpool gold quiet partner III dishwasher? The "light" cycle button is flashing
Submitted: 5 years ago.
Category: Appliance
Expert:  Charles replied 5 years ago.

Hello, and thanks for your question! My name is Charles and I am happy to assist you today!!

It sounds like it is giving you a error code. How many times does it flash??

Customer: replied 5 years ago.
No error code. It flashes continuously.
Expert:  Charles replied 5 years ago.

I am not sure if you tried this one yet, press the following buttons in this sequence. Sani Rinse, Heated Dry, Sani Rinse, Heated Dry, and then the dishwasher should do its diagnostic cycle. It should then be reset. If the problem continues then you need to have the main board checked out.

I hope this helps answer your question and solves your issue.

If so please click the green accept button, if not im still here to assist you.

Thanks again,

Charles

Customer: replied 5 years ago.
It didn't work
Expert:  Charles replied 5 years ago.

Ok, it sounds like the control board is bad. My suggestion is to have a tech finnish the diagnostics for you. You can keep replacing parts and not solve the problem.

If the issue was a siftware problem the reset would have corrected it.

Im sorry I dont have better news for you.

Please do not click the accept button as I did not really solve your issue.

Thanks again,

Charles

Customer: replied 5 years ago.
Thank you for trying Charles!
Expert:  Charles replied 5 years ago.
Your welcome, Thanks again!