How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Gas drier runs, but no heat. Replaced the igniter tday, but

Resolved Question:

Gas drier runs, but no heat. Replaced the igniter tday, but still no heat. Can you help with a suggestion, I hate to keep throwing parts at it.
Submitted: 5 years ago.
Category: Appliance
Expert:  Bryan replied 5 years ago.

Hi,Welcome to Just Answer, My name is XXXXX XXXXX forward to helping you today.


does the igniter glow?

Customer: replied 5 years ago.

Need some time to remove the front panel again. No, Igniter does not glow



Expert:  Bryan replied 5 years ago.
okay , do you have a multimeter?
Customer: replied 5 years ago.
Yes, I have a multimeter.
Expert:  Bryan replied 5 years ago.
okay I'm going to send you a link to test the flame sensor, click this blue link to a video, you need to be careful and disconnect at lest one wires and test it for continuity.
Customer: replied 5 years ago.

Please be patient with me I am trying to test the flame sensor now.

Expert:  Bryan replied 5 years ago.



Customer: replied 5 years ago.
I found that the tab on the flame sensor that one of the wires connects to had broken off the flame sensor. It seems machine vibration broke the tab off. I would like to buy the part locally and finish this repair tomorrow. Can I wait till tomorrow to verify that a new flame sensor, fixed my problem ?
Expert:  Bryan replied 5 years ago.

yes thats it, this happens a lot. change it and your all set, you can order it at the link I sent you. good job, thanks Bryan


and yes you can wait.

Bryan and other Appliance Specialists are ready to help you

Related Appliance Questions