How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Tech Larry Your Own Question
Appliance Tech Larry
Appliance Tech Larry, Home Appliance tech
Category: Appliance
Satisfied Customers: 19183
Experience:  Over 35 years of in home appliance repair and service
14308609
Type Your Appliance Question Here...
Appliance Tech Larry is online now
A new question is answered every 9 seconds

How do I reset a Kenmore Ultrawash Quiet Guard Standard Dishwasher Model

Resolved Question:

How do I reset a Kenmore Ultrawash Quiet Guard Standard Dishwasher?
Model 665.13472K900
Submitted: 5 years ago.
Category: Appliance
Expert:  Appliance Tech Larry replied 5 years ago.
Hello I'm Larry and will be helping you so please stay on line with me until we finish, i will try not to take up to much time ,, thanks

tel me what all the buttons say from left to right on the panel please
Customer: replied 5 years ago.

Sorry I'm not home at this time.

 

How can I answer you later?

 

Expert:  Appliance Tech Larry replied 5 years ago.
yes ,, i will be on until late today ,, thanks
Customer: replied 5 years ago.

Smart Wash; Pots and Pans; Normal Wash; Light Wash; Quick Wash; High Temp; Sani Rinse; Heated Dry; Delay Hours; Cancel Drain; START

 

Expert:  Appliance Tech Larry replied 5 years ago.
sorry to be so long ,,,

to reset the board press these buttons in this order ,, thanks

high temp wash - then - heated dry,
high temp wash - then - heated dry,
high temp wash - then - heated dry,,

if this does not reset it so it works as it should then you will have to replace the control board ,, thanks
Customer: replied 5 years ago.
The reset sequence you suggested didn't work and I already replaced the Board (and now I have the same exact problem with 2 different boards). The Wash, Clean, 4 Hour Delay, and cancel LED's come ON (same as before) and its attempting to DRAIN with no water inside, but The buttons on the panel don't seem to have any affect. I tried the reset with the door closed and with the door open.
Expert:  Appliance Tech Larry replied 5 years ago.
the control panel must be breaking on though the ribbon, part number W10137546
Appliance Tech Larry and other Appliance Specialists are ready to help you
Customer: replied 5 years ago.

The keypad/buttons had shorted, some traces! Required a new Front Bezel and keypad.

 

Thanks