How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 73443
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

We have a Kenmore Oasis he model#(NNN) NNN-NNNN2707. We set the

Customer Question

We have a Kenmore Oasis he model#(NNN) NNN-NNNN2707. We set the washer for a delayed start. Before the washer started we lost power. The next day we started a load of wash, it did not finish the cycle. A code came on the screen , It was "50" "F"
Submitted: 5 years ago.
Category: Appliance
Expert:  Tyler Z. replied 5 years ago.
Hello, and thank you for using this service. I'll be helping you with your problem today.

F50 and F1 are both bad error codes. They means that your relay control board in the back right corner under the control panel is shorted and will need to be ordered and replaced. Below is a link to the part you'll need to order and replace.


Also, below is a link to a video that will show you how to replace the control board yourself.


Related Appliance Questions