How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

For the Maytag 3000 front load washer, what does the F70

This answer was rated:

For the Maytag 3000 front load washer, what does the "F70" error code mean? The machine will not start. We keep getting a dinging bell sound when pushing various buttons.

Machine was working fine before this error code.

Thanks,
Tom

Hi,Welcome to Just Answer, My name is XXXXX XXXXX forward to helping you today.

 

The "F70" error code is indicating a loss of communication between the Central Control Unit (CCU) and the user's interface board on the right hand side of the console. The main top can be taken off by removing the screws along the back edge of the top. NOTE: Disconnect the power cord from the power source before removing the top.

Possible Causes/Procedure:

1.Check for continuity of the user interface harness
2.Check the wire harness connections at the user interface board and the Central Control Unit.
3.If the unit will run and rotate before the "F70" displays usually indicates the user interface board will need to be replaced.
4.If the unit will not run and rotate usually indicates the Central Control Unit will need to be replaced.

 

if you feel you cant do this you will need a technician to come and look at this.

Bryan and other Appliance Specialists are ready to help you