How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 73383
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

LG washer wm 0532hw has the LE error code . have unplugged

Customer Question

LG washer wm 0532hw has the LE error code . have unplugged for several hours and tried to use . will start the cycle but comes up with this code
Submitted: 5 years ago.
Category: Appliance
Expert:  Tyler Z. replied 5 years ago.
Hello, and thank you for using this service. I'll be helping you with your problem today.

There is not a combination of buttons to push to drain the water. LE means that your RPS or "hall sensor" thinks that your tub is not moving properly. Generally this results in needing the sensor itself replaced. If you wanted to manually drain out your washer, there is a small access panel at the bottom of your front panel. Open the access panel and there is a 3" diameter plastic drain cap you can unscrew and all the water will come out that's in the tub. Make sure you have a wet vac or something to collect all the water if you start to turn the drain cap plug.
Customer: replied 5 years ago.
Relist: Other.
i had explained that i had already tried this solution
Expert:  Tyler Z. replied 5 years ago.
if you already replaced your RPS sensor and you still have the LE error coming up, open the door and spin the tub to make sure it spins smoothly. If so, then unfortunately the motor itself will need to be replaced.

Related Appliance Questions