How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 73383
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

mcs130 bake element not heating, gettting red. removed element

This answer was rated:

mcs130 bake element not heating, gettting red. removed element ck'd resistance , 26.1 ohms is this correct? if so what todo next/
Hello, and thank you for using this service. I'll be helping you with your problem today.

Does the oven still heat on broil? And yes 26 ohms means the element is good.
Customer: replied 5 years ago.
ok then if your element is good that means that your relay control board is shorted. There are no fuses or thermostats in this unit that will cut power to the bake element but not to the broil element. So if you bake element is good and the broil still works, that leaves only the relay control board. You'll need to replace the relay board to fix your problem and the part is normally about $250-300.

Tyler Z. and other Appliance Specialists are ready to help you

Related Appliance Questions