How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bob L Your Appl Pal Your Own Question
Bob L Your  Appl Pal
Bob L Your Appl Pal, Home Appliance Tech
Category: Appliance
Satisfied Customers: 7548
Experience:  23 Years Major Appliance Repair
14958677
Type Your Appliance Question Here...
Bob L Your Appl Pal is online now
A new question is answered every 9 seconds

WHATS THE PROBLEM WITH MY SEARS 2 TON FLOOR JACK MODEL 32812160

Customer Question

WHATS THE PROBLEM WITH MY SEARS 2 TON FLOOR JACK MODEL 32812160 WONT HOLD PRESSURE
Submitted: 5 years ago.
Category: Appliance
Expert:  Bob L Your Appl Pal replied 5 years ago.
Hi ...My name is Bob...I will be helping you on your repair today...Is this a brand new jack..?
Customer: replied 5 years ago.
No several years old but hardly used and it worked last time.
Expert:  Bob L Your Appl Pal replied 5 years ago.
If you have purged the air out of the cylinder..And the unit is not leaking from the valve..Then the seal on the cylinder is leaking...WHat happens is the seal dry out..Especially if it is not in use...Take some soapy water and spray it around the seals and valve..Pump it up..See if you can see any bubbles caused by air leaking..If not then check the cylinder for fluid..The fluid on the cylinder is a sign of leakage.