My Maytag, Legacy 200 Series Dishwasher is not working, the start is not turning the machine on?
Model: Legacy Series, Quiet 200
To see if the door was closing properly,
pushing the buttons for the pad.
Hi, my name is Chas, I am hoping that I will be able to help you with your problem today..is it allowing you to change options still?Also can I get the complete model number from inside the tub area when you open the door???WARNING, if you use the OPT OUT button on the tool bar, this will bar me from answering back to you. once pressed I cannot answer anymore of your questions...Use this button with caution...
Yes cycle select and delay is still changeable.
What kind of numbers or letters are you lokking for their are many on the left rail inside of the washer?
If you open the door on the side of the tub there should be a sticker and the model number will be a couple of letters and then some numbers after it, most likely will start with the letter "M"
I changed the board a couple of years ago, just to let you know, and we have had many power outages lately.
We also just came back from vacation and it worked before we went away.
Do the lights on the display go out when you open the door?
No they stay luminated
Your problem is either a bad keypad or a bad door switch,, this model had a lot of problems with the door switch failing and then the Dishwasher will not start, the part number for the door switch is W10130696, You can order the parts you need from the following places, www.apwagner.com, www.repairclinic.com, www.searspartsdirect.com, or www.partstore.com, all of these places offer easy returns and reasonable prices for their items.Your acceptance of my answer if helpful to you, requires that you press the GREEN ACCEPT button, this will allow me to get credit for helping you today, The deposit you paid in the beginning is just that and does not transfer to any experts until you press it... NEGATIVE FEEDBACK should not be given, I am willing if my advice is not SATISFACTORY to give you a refund of your deposit. I cannot know everything since I am not there with you to see all the conditions that the appliance we are talking about, Pressing the ACCEPT button will not stop me from continue to helping you in the future if needed on the problem we are working on.. Bonuses are welcome if I have helped you a lot, however they are not mandatory
Can I bypass the door switch to verify this is the problem?
You can jump out the switches to see if it comes on..
Maytag, Whirlpool, GE & Kenmore Factory Trained Service Tech
Thanks Chas for your help! I will leave a tip for you and Positive feed back, have a great day!