How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 77507
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

Can the bellow of a whirlpool duet ghw9460 be taken off and

This answer was rated:

Can the bellow of a whirlpool duet ghw9460 be taken off and clean?
Hello, and thank you for using this service. I'll be helping you with your problem today.

The bellow can be taken off and cleaned, but if you have mold stains on the bellow, those will never come out. The bellow would just need to be replaced if that were the case. There are 2 retaining rings around the front and back of the bellow you need to remove, then the bellow will pull straight forward and out. Below is a link to a video that shows you how to remove the bellow on a Bosch washer, which is actually very similar to the Duet washer. The only difference is that the back retaining ring is not spring loaded, it is a worm clamp. That means that there is a screw in the upper right corner that you need to loosen to remove the clamp and pull the bellow off. Below is a link:


Tyler Z. and 6 other Appliance Specialists are ready to help you