How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask rick ready Your Own Question
rick ready
rick ready, Home Appliance Technician
Category: Appliance
Satisfied Customers: 235
Experience:  I have 29 years exp. on all makes and models just ask
26453129
Type Your Appliance Question Here...
rick ready is online now
A new question is answered every 9 seconds

My intellowasher just stopped mid load and will turn on but

Customer Question

My intellowasher just stopped mid load and will turn on but not start.I think it said OE
Submitted: 5 years ago.
Category: Appliance
Expert:  rick ready replied 5 years ago.

rick ready :

hello let me help you with that.

Customer:

Ok any ideas?

rick ready :

hello what i want you to do is pull the plug wait for one ful min. then plug it back in .

Customer:

ok I will try that

rick ready :

what we are doing is reseting the main control

Customer:

thankyou that seems to have worked! I cant believe I didn't try that myself!

rick ready :

thank you for using just answer,please press accept a bonus is appreciated.

rick ready and 2 other Appliance Specialists are ready to help you
Customer: replied 5 years ago.
I started a rinse and spin load to finish the wet load that was not finished .The machine cycle started but stopped when it came to spinning/draining. This happened twice.
Expert:  rick ready replied 5 years ago.

that sounds like the filter is clogged.the washer will not continue to next cycle.

 

Customer: replied 5 years ago.
The filter at front left hand corner of machine that you have to open panel and then unscrew is clean and empty,and was all along.Is there another filter that I can check/access?
Expert:  rick ready replied 5 years ago.
if the drain is clear then you need to replace the mtr.control board,
Customer: replied 5 years ago.
Thankyou I got someone to come and look at it $126 later it now works.There was a bobby pin and bra wire in the filter further back.I didn't realise I had to look that far back. Thanks for your help but in the end it didn't really.

Related Appliance Questions