How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

kenmore model XXXXXXXXXXX topload washer immediately starts

Resolved Question:

kenmore model XXXXXXXXXXX topload washer immediately starts agitating as it fills with water and also adds some water at the very end of the spin cycle
Submitted: 5 years ago.
Category: Appliance
Expert:  Bryan replied 5 years ago.

Hi,Welcome to Just Answer, My name is XXXXX XXXXX forward to helping you today. lets get started.


You will need to replace your pressure switch, also called the water level switch, it is a knob you turn to set the load size,it is not sensing the water correctly as it goes in so it starts agitating the water is even full, this is been a common problem with these, you can order the switch at the following link, this will take care of your issue, thanks, Bryan

Bryan and 2 other Appliance Specialists are ready to help you

Related Appliance Questions