How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 73368
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

Top washer is will only set to 5 minutes and the Heavy, Fast,

Resolved Question:

Top washer is will only set to 5 minutes and the Heavy, Fast, and Rinse lights are on simultaneously. Can not choose a different cycle.
Submitted: 5 years ago.
Category: Appliance
Expert:  Tyler Z. replied 5 years ago.
Hello, and thank you for using this service. I'll be helping you with your problem today.

The model number you gave is for a dishwasher. Is the control panel beeping? Also, which lights are lit up from LEFT to RIGHT on the progress cycle? There are eight lights. Example: (1st, 5th, 8th).

Customer: replied 5 years ago.
It does beep once every minute or so.
Cycle lights for Heavy, Fast and Rise light up at the same time when and for about a minute after power button is pressed and "5 min" is displayed on panel.
If start button is pressed, machine will wash for 5 min then stop. If start button is not pressed, the display show a rapid repeated count down of cycle mins like 100, 81, 62,45, 30, 10, 5.. then all over again.
Expert:  Tyler Z. replied 5 years ago.
ok, this is just a shorted control board then unfortunately. You'd need to order and replace the control board in order to correct this issue I'm affraid. The part is about $150-200.

Tyler Z. and 3 other Appliance Specialists are ready to help you

Related Appliance Questions