How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Repairman1981 Your Own Question
Repairman1981
Repairman1981, Home Appliance Technician
Category: Appliance
Satisfied Customers: 4555
Experience:  10 years Repairing Appliances, Factory Trained in Several Major Brands Self employed owner at All Better Appliance
41736587
Type Your Appliance Question Here...
Repairman1981 is online now
A new question is answered every 9 seconds

I am getting a speed indication error on my Maytag neptune

Resolved Question:

I am getting a speed indication error on my Maytag neptune MAH7500 it doesn't respond to pushing start/pause even unpluged and pluged back in.
Submitted: 5 years ago.
Category: Appliance
Expert:  Repairman1981 replied 5 years ago.

Repairman1981 :

then your motor needs replacement

Repairman1981 :

The speed sensor is built into the motor

Customer:

That doesn't sound good is that expensive?

Repairman1981 :

not really

Repairman1981 :

In the grand scheme of things it's less than 1/4 the cost of a new machine

Repairman1981 :

In the less than 50.00 repair category it's VERY expensive

Repairman1981 :

All relative though

Customer:

ok I have a repair person to call they just charge 89 just to come out.

Repairman1981 :

you can do it yourself

Repairman1981 :

Not in the nashville area are you?

Customer:

No long ways from nashville how can I do myself

Repairman1981 :

you just take the panel off the back and it's only a couple screws

Repairman1981 :

The hardest part is taking the belt off and putting it back on

Customer:

Well thanks I will figure it out.

Repairman1981 and other Appliance Specialists are ready to help you