hi there the tub is sustained by three suspension springs it is designed bad
the idea they say is that when it spins it will eventually self center the load
its suspended by four rods connected to springs, but sways side to side very easy and bangs the sides of the washer.
that is the designed of this washer
many customers have this issue
can i get a model number
it did not do this when we first bought this. it worked well first couple years, now we can't do one load without resetting a dozen times.
unless those springs are no longer holding tension
then its not resisting the weight of the tub
are you there
did you get the picture and what i wrote
one of those springs or the components on them are bad or worn
yes I've looked up those parts before. they seam to be in good shape. but they dont have a load on them right now. I have the back off the washer and im looking at them now
can i order just the 4 springs and replace them and see if that works?
yes you can
definitely recommend that
you can order them at www.repairclinic.com they ship overnight
pressing accept for my help pays me thanks good luck