How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I just replaced the pump and motor assembly on my GE dishwasher

Resolved Question:

I just replaced the pump and motor assembly on my GE dishwasher modle GSD4320Z04BB and I am unsure how to reconnect the wiring harness. There are two connecters, one to the motor and one to the drain solenoid. One connector is blue and one is white, both configured the same, except for the wire colors to the connecters. The blue one has a blue wire on one side and two white with red stripe wires on the other side. The white one has a grey wire on one side and two white with red stripe on the other. Which one goes to which feature?
Submitted: 5 years ago.
Category: Appliance
Expert:  Bryan replied 5 years ago.

Hi,Welcome to Just Answer, My name isXXXXX will be helping you with your appliance issue today.

 

let me take a look at the model, I'll be back shortly, thanks Bryan

Expert:  Bryan replied 5 years ago.
grey and white goes to the soleniod and the blue one motor. thanks Bryan
Customer: replied 5 years ago.
How can I keep from reversing the connecters on the correct device? In other words, if I install the connecter upside down the leads would be reversed. In this case what would happen?
Expert:  Bryan replied 5 years ago.
it desnt matter which way you plug these in,
Bryan and other Appliance Specialists are ready to help you