How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 73443
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

I get a VERY loud noise during the spin cycle of myn Maytag

This answer was rated:

I get a VERY loud noise during the spin cycle of myn Maytag MAH2400 FL washer...also, when using during the final spin I get a SUdS error message...EVEN if I am not using any detergent...
Hello, and thank you for using this service. I'll be helping you with your problem today.

The loud noise means that your main tub bearing is going out and will need to be ordered and replaced to fix the issue. The bearing is is part of the outer tub so the entire outer tub needs to be replaced, quite a major job. Because the tub doesn't turn as smoothly as it's supposed to, the unit thinks there is suds and water left which is why you're getting the Suds error.
Customer: replied 5 years ago.
Approximate cost of repair parts?
about $500-550 probably.
Customer: replied 5 years ago.
Thanks for the info...looks like I am buying a new washer!
That's normally what happens when someone gets this problem unfortunately.
Tyler Z. and other Appliance Specialists are ready to help you

Related Appliance Questions