How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 74474
Experience:  9+ years being an appliance technician with factory training.
13574879
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

Dishwasher model GCD4800 L00BB Serial SL800073C the Normal

Customer Question

Dishwasher model GCD4800 L00BB Serial SL800073C
the Normal and Heat Dry lights are flashing.

Any help would be greatly appreciated.

Thank you in advance.

Marius
Submitted: 5 years ago.
Category: Appliance
Customer: replied 5 years ago.
Relist: Inaccurate answer.
Dishwasher model GCD4800 L00BB Serial SL800073C.

The Normal and Heat Dry lights are flashing simultaneously.

The control board should be okay. This must be just a machine program sequence glitch.

I need to reset the main control board so that I
can get the machine working. There is no reset button. There must be a sequence of buttons that need to be pressed for that. But I do not know where to find this information.

Any help would be greatly appreciated.

Thank you in advance.

Marius
Expert:  Tyler Z. replied 5 years ago.
You can't reset the control board, you need to replace the control board itself. That error means that the dishwasher cannot advance, and the control board is the part that advances the cycle so it needs to be replaced.

Related Appliance Questions