How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

how do i get the front cover off of a maytag washer- model

Resolved Question:

how do i get the front cover off of a maytag washer- model mavt734eww ?
Submitted: 5 years ago.
Category: Appliance
Expert:  Bryan replied 5 years ago.

Hi,Welcome to Just Answer, My name isXXXXX will be helping you with your appliance issue today.

 

Okay to get the front panel off on this you need to pushed in the two clips that hold the top, these are about 2 to 3 inches in from each side between the top and the front panel number six on this diagram, take a putty knife and push these clips in and lift the whole top up and let it lean back against the wall, then you will see the screws you need to take out on the inside to remove the front, hope this helps, thanks, Bryan

Bryan and other Appliance Specialists are ready to help you

Related Appliance Questions