How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 78329
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

Maytag Dishwasher model #MDB7100AWB Will not strart. I push

Resolved Question:

Maytag Dishwasher model #MDB7100AWB
Will not strart. I push the normal wash button, panel lights up as usual but nothing happens.
Submitted: 6 years ago.
Category: Appliance
Expert:  Tyler Z. replied 6 years ago.
Hello, and thank you for using this service. I'll be helping you with your problem today.

If you let it sit for a few minutes do the lights on the control panel go out?
Customer: replied 6 years ago.
Not that I know. Currently electricity is off, I'll turn it back on now
Expert:  Tyler Z. replied 6 years ago.
OK turn it back on, select a cycle and wait about 5 minutes to see if the lights turn off after waiting a few minutes after trying to start the dishwasher.
Customer: replied 6 years ago.
Lights stayed on and panel timer went from 97 to 96 and stayed there, lights still on.
Expert:  Tyler Z. replied 6 years ago.
ok then you just have a bad control board unfortunately. Below is a link to the control board you'll need to order and replace to fix the issue. The control board is located inside the door near the top.


Tyler Z. and other Appliance Specialists are ready to help you