How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tom Johnston Your Own Question
Tom Johnston
Tom Johnston, Home Appliance Technician
Category: Appliance
Satisfied Customers: 8007
Experience:  20 years experience
14207197
Type Your Appliance Question Here...
Tom Johnston is online now
A new question is answered every 9 seconds

OK I am attempting to clean outside of the bottom freezer 21

Resolved Question:

OK I am attempting to clean outside of the bottom freezer 21 cu ft refrigerator.

Have pried off vent cover and will vac and brush out coils below.

Trying to figure out how to move frig to access the back and floor and to unplug for interior cleaning.

The front covers over stabilizers have been removed.

Can't work out how to get frige to move - can you help me please as I'm only one in house who can do this and I'm not that clever!
Submitted: 5 years ago.
Category: Appliance
Expert:  Tom Johnston replied 5 years ago.
Hi welcome to just answer my name is XXXXX XXXXX i will be helping you today with your problem.
You can wiggle it side to side well pulling it out.


If this has been helpful please press accept.Smile
Customer: replied 5 years ago.
Understand, however would the front leveling feet be in the way?
Expert:  Tom Johnston replied 5 years ago.
If it has leveling legs that are in front of the rollers. You would want to wind the legs up so the rollers are on the floor.


If this has been helpful please press accept.Smile
Customer: replied 5 years ago.
Hi Sorry for delay - had to get an adjustable wrench which unstuck one of the legs.

Yes frige is moving, thank you.

Will resetting the leveling legs be as easy as reversing them clockwise to level?
Expert:  Tom Johnston replied 5 years ago.
Yes you should have no problem resetting them.


If this has been helpful please press accept.Smile
Tom Johnston and 3 other Appliance Specialists are ready to help you