How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim Alan Your Own Question
Tim Alan
Tim Alan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 1256
Experience:  Amana, A&E (Whirlpool) ,and Maytag factory service
51145682
Type Your Appliance Question Here...
Tim Alan is online now
A new question is answered every 9 seconds

how do i get top off maytag bravo mct washer

Customer Question

how do i get top off maytag bravo mct washer
Submitted: 5 years ago.
Category: Appliance
Expert:  Tim Alan replied 5 years ago.

Tim Alan :

Hi my name isXXXXX can help you with that. There are clamps that on each corner in the front that are pushed un using a putty knife, go one side at a time and lift up on each corner when you push in on the clamps.

Tim Alan :

The clamps are about 2-3 inches away from the ends.

Customer:

DO YOU KNOW WHAT P 51 CODE STANDS FOR

Tim Alan and other Appliance Specialists are ready to help you
Expert:  Tim Alan replied 5 years ago.
That is typically an rps sensor failure. Follow the tech sheet diagnostics inside the unit. That f51 is tricky what it basically means is no motor rotation detected, most of the time it is an rps sensor but it could be the unit controler/motherboard, or both.

Related Appliance Questions