How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask william Your Own Question
william, Home Appliance Technician
Category: Appliance
Satisfied Customers: 3034
Experience:  Major Home Appliance Technician Specialist Whirpool Certificate
Type Your Appliance Question Here...
william is online now
A new question is answered every 9 seconds

How do you get to the belt in a stacked Maytag dryer to check

Customer Question

How do you get to the belt in a stacked Maytag dryer to check it? It is a series 1000.
Submitted: 5 years ago.
Category: Appliance
Expert:  william replied 5 years ago.
Would need the model number please?
Customer: replied 5 years ago.
LSE 1000 series 6 SN# 209762
Expert:  william replied 5 years ago.

Ok this is what you need to do. Remove the dryer toe kick panel then remove the lint filter and line duct assembly then remove the blower housing then remove the dryer front panel.If you have the dryer belt now you can loop the drive belt over the drive motor pulley. Pull the tensioner pulley up and place the belt on it so that the belt is tight when the pulley is released.






Press the accept button this is how im paid for either suggesting or helping you today. Thank-you.



Related Appliance Questions