How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask william Your Own Question
william, Home Appliance Technician
Category: Appliance
Satisfied Customers: 3034
Experience:  Major Home Appliance Technician Specialist Whirpool Certificate
Type Your Appliance Question Here...
william is online now
A new question is answered every 9 seconds

On a Maytag E2L wringer washer what is supposed to hold the

Resolved Question:

On a Maytag E2L wringer washer what is supposed to hold the agitator onto the splined shaft? We use one at our fire station for our chamois cleaning but now the agitator comes up off the shaft after only a few turns. I replaced the rubber stop on the shaft as the old one was hard thinking it was a friction fit but that didn't work either. Anybody have an answer?
Submitted: 5 years ago.
Category: Appliance
Expert:  william replied 5 years ago.

You will need a 7/16 bolt that bolts down into the shaft.







Customer: replied 5 years ago.
from where? there's no hole on top of the agitator and nothing on the side. How would you get a bolt in there? There's no threads tapped into the to of the shaft.
Expert:  william replied 5 years ago.
Whats the model number please? Thanks.
Expert:  william replied 5 years ago.

Sorry about that but this is all i can find for you there is a contact info here too. Sorry didnt realize it was this old.







william and other Appliance Specialists are ready to help you

Related Appliance Questions