How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike Your Own Question
Mike
Mike, Home Appliance Technician
Category: Appliance
Satisfied Customers: 17629
Experience:  I have been repairing appliances for 25 years, I run my own appliance repair business.
22302088
Type Your Appliance Question Here...
Mike is online now
A new question is answered every 9 seconds
Appliance

Maytag dishwasher clean light is blinking unit wont turn

Maytag dishwasher clean light is... Show More
Maytag dishwasher clean light is blinking unit won't turn on
Submitted: 6 years ago.
Category: Appliance
Show Less
Ask Your Own Appliance Question
replied 6 years ago.
Hi my name isXXXXX will be assisting you with this problem.

can you give me the model number please. Should be on a sticker around the door.
Customer reply replied 6 years ago.
NDDH979AWB2
Mike, Home Appliance Technician replied 6 years ago.
Hi that model number is XXXXX coming up on my system, can you check it again. Also does the light blink 7 times then pause then blink 7 times and so on?
Customer reply replied 6 years ago.
yes that is how the light is blinking 7 on off 7 on off model correct number is XXXXX
Mike, Home Appliance Technician replied 6 years ago.
Ok can you tell me what buttons are on the control panel from left to right please.
Customer reply replied 6 years ago.
heavey norm light hi temp wash heated dry sanitize start cancel
Mike, Home Appliance Technician replied 6 years ago.
Ok hit the following buttons one at a time.

High temp wash

Heated dry

High temp wash

Heated dry

Then hit cancel and wait for the pump to stop. After this you should be all set. If after hitting the reset you still have the same problem then the control board is bad and will need to be replaced.

If you have any questions please feel free to ask. If you have no further questions please don't forget to hit the accept button since this is how I get paid for my time and effort. Thanks.

Mike
Customer reply replied 6 years ago.
is cancel considered the reset if not where is the reset
Mike, Home Appliance Technician replied 6 years ago.
No the reset procedure is to hit the buttons one at a time,

High temp wash

Heated dry

High temp wash

Heated dry

Then hit cancel and wait for the pump to stop.
Customer reply replied 6 years ago.
It is working thank you for your help
Mike, Home Appliance Technician replied 6 years ago.
Your welcome.

If you have any questions please feel free to ask. If you have no further questions please don't forget to hit the accept button since this is how I get paid for my time and effort. Thanks.

Mike