How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Alan Your Own Question
Alan
Alan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 273
Experience:  20+ years in the appliance repair field.
11470909
Type Your Appliance Question Here...
Alan is online now
A new question is answered every 9 seconds

How to replace the powerscrew in a KUCC151EBL1 trash compa

This answer was rated:

How to replace the powerscrew in a KUCC151EBL1 trash compactor?

Removal

1. Disconnect power.

2. Lay the compactor on its front; be careful not to damage the loose switch wires and switches.

3. Remove bottom panel (five screws.)

4. Remove power screw flange screws from base.

5. Slide out or unthread the power screws.

 

graphic

 

Alan and other Appliance Specialists are ready to help you

Related Appliance Questions