How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
10522817
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a GE Fridg Model # GSS25QGTG Serial # DR 416174 The

Resolved Question:

I have a GE Fridg Model # XXXXX Serial # XXXXX 416174

The damper from the ice maker doesn't close properly, causing frost build up in the ice maker as well as the shoot through the door. Is ther a replacement spring? Can it be fixed by cleaning?
Submitted: 5 years ago.
Category: Appliance
Expert:  Bryan replied 5 years ago.

Hi,Welcome to Just Answer, My name isXXXXX will be helping you with your appliance issue today.

 

you will need to replace the dispenser solenoid in this,

90% of the time these get rusted and don't close correctly.

heres the diagram and the other thing to check is the spring on the flap # XXXXX its one or the other, i believe the solenoid is the issue though, its the most common reason in these. thanks Bryan

Customer: replied 5 years ago.
Where do I get access to the solenoid?
Expert:  Bryan replied 5 years ago.
Number 93 on the diagram snaps off, there are flathead screwdriver slots in the bottom of number 93 so you can pop it off,, one sets out there are screws four of them you will see to take part number 58 off, and it's behind there, not too difficult a job and you should be able tell what the problem is as you get it apart, hope this helps thanks, Bryan
Bryan and 2 other Appliance Specialists are ready to help you