How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a Frigidaire Dishwasher 4000 Series AquaSurde Tech with

This answer was rated:

I have a Frigidaire Dishwasher 4000 Series AquaSurde Tech with Speed Clean. My problem is that it starts when it wants and has an Er code. I am unable to clear it so that I can even try to run the cycles over again to see what may be the problem.

Hi,Welcome to Just Answer, My name isXXXXX will be helping you with your appliance issue today.


do you have a full model #?

Customer: replied 5 years ago.
Where would I be able to find it??
open the door and there should be a tag on one of the side walls or on the door itself.
Customer: replied 5 years ago.
Model #: GLD4355RFS0
The control board has failed in this, it will need to be replaced it is $96.00 @ and this is located in the door, you'll need to remove all the screws around the inside of the door and left the door panel up to get to this, thanks and well wishes, Bryan
Bryan and other Appliance Specialists are ready to help you

Related Appliance Questions