How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Whirlpool range, model #SF365PEGW 7, started beeping and code

Customer Question

Whirlpool range, model #SF365PEGW 7, started beeping and code F1 E1 blinks. The range works fine, but can't figure out why it blinks and beeping. We looked in the manual but it gave no explanation, How can we fix this?
Submitted: 5 years ago.
Category: Appliance
Expert:  Bryan replied 5 years ago.

Hi,Welcome to Just Answer, My name isXXXXX will be helping you with your appliance issue today.


this is not a good code, it means the board needs to be replaced,

F1 - E1 Safety flip flop Replace board


let me see what I can find out about the board, thanks Bryan

Bryan and 2 other Appliance Specialists are ready to help you
Customer: replied 5 years ago.


Do you have a part number and the approximate cost of it? How difficult is it to replace the board?


Expert:  Bryan replied 5 years ago.
the board is part of the clock, part #
3196970 you can order this @ rts/Range-Parts/3196970/0022/664/Model-SF365PEGW7/1198/0124002?keySuffixId=NA&productTypeId=x&searchModelNumber=SF365PEGW7&subCompDesc=Control%20panel&brandDesc=WHIRLPOOL&modelDesc=GAS-RANGE&blt=11 for $168.00, hope this helps, you pull the range out and take the control panel cover off to get to this. thanks Bryan
Customer: replied 5 years ago.
I do not expect to pay twice for the information I should have received in the first answer.
Expert:  Bryan replied 5 years ago.
no you wont, you already paid only once we are all set just don't press the accept button again, I was just getting the info to you, thanks Bryan

Related Appliance Questions