Need Appliance Repair Help? Ask a Technician for Answers ASAP
maybe this helps
i tried to look at that you tube link and could not find it
is it the same type?
The you tube given above does not seem to be working. The piece that is loose is a conical feed tube. It was lying free in the tub below the lower rack. I think it must fit in under the rack and move in an out of the cabinet with it....
wait the link is working now....let you know
I will do this also, but it does not address my question about the upper spray feed tube...
any more thoughts on how to reattach the spray arm feed tube?
send me some pics of the part ur talking about. is the video the same dishwasher?
no it is different i will get a pic of the part
i will look online im pretty sure i saw it on one of the websites
try this link here....it is part number 5
the lower spray arm has a black rubber collar or boot i did not see how the spray arm feed tube would attach to the arm below....it must have to go under the lower rack b/c it will hv to move in and out with the rack
i believe that part goes up in wash mode and comes down when finished
OK then how do I reattach? it was sitting free in the bottom of the basin. Does it go beneath the lower rack?
yes it does go under
ok I try and see what up
check part make sure its not broken
Yes I suppose that is a possibility....
it is kind of hard to tell from the schematics ive seen to this point but it is a common model and would not be hard to get another part do yu have a good link for what is sopposed to look like undamaged?
get the part nimbr and type it in there
accept when satisfied