How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 74271
Experience:  9+ years being an appliance technician with factory training.
13574879
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

WTW6600 SW2 Cabrio Top Load Washer keeps flashing F 50 when

Resolved Question:

WTW6600 SW2 Cabrio Top Load Washer keeps flashing F 50 when want to go into wash cycle, won't wash or spin
Submitted: 6 years ago.
Category: Appliance
Expert:  Tyler Z. replied 6 years ago.
Hello, and thank you for using this service. I'll be helping you with your problem today.


Unfortunately, unplugging the washer isn't going to get rid of an F50 error. F50 means that your control board is shorted inside the control panel on the far right side. Below is a link to the control board that would need to be ordered and replaced to fix the issue, but it's about $200 for the part alone I must warn you.

CLICK HERE
Tyler Z. and other Appliance Specialists are ready to help you

Related Appliance Questions