How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tim Alan Your Own Question
Tim Alan
Tim Alan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 1256
Experience:  Amana, A&E (Whirlpool) ,and Maytag factory service
Type Your Appliance Question Here...
Tim Alan is online now
A new question is answered every 9 seconds

maytag mdb4651aww cycle selec control lights good pres start

Resolved Question:

maytag mdb4651aww cycle selec control lights good pres start b.. nathing...
Submitted: 5 years ago.
Category: Appliance
Expert:  Tim Alan replied 5 years ago.

Tim Alan :

Sounds like the start button is not responding, the control panel could be bad. When the start button is pressed there is slight blink from the other lights, if it doesn't blink then replace the control panel. Common problem on the Maytag models for that start button to go out.

Tim Alan :

The part number for the control panel is 99003378. The other thing is check the latch assy for a broXXXXX XXXXXdle typically the lights don't come on at all when those are bad though that part number is XXXXX

Tim Alan :

Let me know if you need any further assistance otherwise please press the accept button and leave a comment, thank you.

Tim Alan :

sorry try it again

Tim Alan and other Appliance Specialists are ready to help you

Related Appliance Questions