How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 73406
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

We have a Jenn Air Dual Fuel Stove, Model # JDR8895AAS. We

Resolved Question:

We have a Jenn Air Dual Fuel Stove, Model # XXXXX

We have problems with the touch Pad. When we press a funtion like Upper Bake to set a temp, it will display usually Timmer 2. Other function buttom just do not work correctly as well. Is this the computer board fault?
Submitted: 5 years ago.
Category: Appliance
Expert:  Tyler Z. replied 5 years ago.
Hello, and thank you for using this service. I'll be helping you with your problem today.

Yes, this is going to just be a faulty control board for both issues unfortunately. If you've tried to unplug the unit for 60 seconds and that didn't reset the board, you'll just need to order and replace the display board. Below is a link to the board you'd need to order and replace.


Tyler Z. and 4 other Appliance Specialists are ready to help you