How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 73484
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

i have disher washer kenmore that will not start the heatdry

Resolved Question:

i have disher washer kenmore that will not start the heatdry light is on
Submitted: 5 years ago.
Category: Appliance
Expert:  Tyler Z. replied 5 years ago.
Hello, and thank you for using this service. I'll be helping you with your problem today.

Is the heated dry light flashing or is it solid? Also, do you have a model number so that I can better assist you to see what this error means?
Customer: replied 5 years ago.
the light is solid do not see model #
Expert:  Tyler Z. replied 5 years ago.
the model number should be on a sticker around the frame of the dishwasher if you open the door.
Customer: replied 5 years ago.
can not find # XXXXX old
Expert:  Tyler Z. replied 5 years ago.
ok well unfortunately it sounds like you have a bad control board. On most models if the touchpad goes out, the light will flash not stay solid. Try turning the circuit breaker off for 60 seconds and if that doesn't reset the control board, it will need to be replaced.
Tyler Z. and other Appliance Specialists are ready to help you

Related Appliance Questions