How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask esequiel walker Your Own Question
esequiel walker
esequiel walker, Home Appliance Technician
Category: Appliance
Satisfied Customers: 4670
Experience:  my father has an appliance repair business for over 30 yrs i have 18 yrs exp
15396620
Type Your Appliance Question Here...
esequiel walker is online now
A new question is answered every 9 seconds

how do i get the cover off.

Customer Question

how do i get the cover off.
Submitted: 6 years ago via ApplianceRepair.Net.
Category: Appliance
Expert:  esequiel walker replied 6 years ago.

esequiel walker :

hi there what cover are you talking about

JACUSTOMER-cvxmguld- :

i cant test any part such as timmer, water inlet vaule

esequiel walker :

what is the actual problem

esequiel walker :

whats the problem

esequiel walker and 4 other Appliance Specialists are ready to help you
Customer: replied 6 years ago.
no water enter into machine need to get cover off so i can test it
Expert:  esequiel walker replied 6 years ago.
hi ok this maytag dryer has the timer right in the middle correct
Customer: replied 6 years ago.
yes
Expert:  esequiel walker replied 6 years ago.

look behind the top panel on each corner do u see a screw

 

Customer: replied 6 years ago.
no
Expert:  esequiel walker replied 6 years ago.
ok look in front of the panel on each side there is a clip that pushes in at the same time raise the panel
Customer: replied 6 years ago.
no their are are one screw on each side no clamp.
Expert:  esequiel walker replied 6 years ago.
ok did you remove the screw my diagram is not clear
Customer: replied 6 years ago.
i cant remove the two screw because i cant get to them i got to get the cover off
Expert:  esequiel walker replied 6 years ago.
those screws hold the panel in place removing them then the panel lifts up so u can remove the casing to access the water valve
Customer: replied 6 years ago.
i cant get the panel off to get to anything inever seem a washer like this in most cased their are two screw on each side of the control panel.their are no screw any where so i can so i can get inside the machine
Expert:  esequiel walker replied 6 years ago.

give me one second

 

Customer: replied 6 years ago.
i can GAining access to the internal part it look like a seal unit. Just cant get to anything tried to get in from the front nothing work, try to get in from the back no luck
Expert:  esequiel walker replied 6 years ago.
ok sir i justed looked up this washer and ive done many the clips on each side are there get a butter knife or flat screwdriver on each end push the knife in at the same time pulling the panel upward it will release
Customer: replied 6 years ago.
there are two screew their one on each side you can see the top bending as you put pressure on it no clip on each side are in the front
Expert:  esequiel walker replied 6 years ago.
yes there is a clip on each side on the front of it here look at number 3 thats the clip sir
Expert:  esequiel walker replied 6 years ago.
its nuber 3
Customer: replied 6 years ago.

their are no clamp only too screew one on each side ican see the screew but no clamp so we cant help each other

Expert:  esequiel walker replied 6 years ago.
im sorry you are having such a hard time but this model thats exactly how the top panel comes off for access .i guarantee it/

Related Appliance Questions