How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 74315
Experience:  9+ years being an appliance technician with factory training.
13574879
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

I HAVE A WHIRLPOOL DISHWASHER. THE CLEAN LIGHT BUTTOM IS FLASHING

This answer was rated:

I HAVE A WHIRLPOOL DISHWASHER. THE CLEAN LIGHT BUTTOM IS FLASHING AND IT WILL NOT START. MOD#DU1048XTPS0
ok you need to reset the control board. Press "high temp wash, heated dry, High temp wash, heated dry, high temp wash, heated dry, high temp wash, heated dry, high temp wash"

All the lights will go solid at which point you press cancel to reset the board.

**NOTE** if you don't have a "heated dry" button, use the "air dry" or "energy saver dry" button instead.
Tyler Z. and 5 other Appliance Specialists are ready to help you

Related Appliance Questions