How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 26795
Experience:  Appliance repair business owner for over 43 years.
12064207
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

We have Model 25 side by side - Free-O-Frost. The plastic

Customer Question

We have Model 25 side by side - Free-O-Frost. The plastic water supply tube for the door water dispenser seems to be broken. If you get water from the door it leaks onto the floor. How can we repair it? Thank you, XXXXX
Submitted: 6 years ago.
Category: Appliance
Expert:  John replied 6 years ago.

Thanks for the question.

Is there enough slack at the hose to add a coupling.

Customer: replied 6 years ago.
Maybe but wondering how to access hose inside freezer door/ disassemble door if needed?
Expert:  John replied 6 years ago.
I need the complete model number so I can look at the fridge please.
Customer: replied 6 years ago.
Where can I find it?
Expert:  John replied 6 years ago.
Open the fridge door it should be on the side of the liner.
Customer: replied 6 years ago.
It says Model 25 cu. ft/side by side ice and water. I cannot find a model number
Expert:  John replied 6 years ago.

http://www.askmehelpdesk.com/plumbing/water-inlet-ice-maker-leaking-311624.html

Well if you have enough line to use this coupler , if you don't then the door has to came apart to get inside the door so hole fully you can do the repair of the line without taking the door apart.

Customer: replied 6 years ago.
This is not working for me - please forget it - not getting any answer that is helping
Expert:  John replied 6 years ago.
Well if I had the model I could help you.