How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bob L Your Appl Pal Your Own Question
Bob L Your  Appl Pal
Bob L Your Appl Pal, Home Appliance Tech
Category: Appliance
Satisfied Customers: 7548
Experience:  23 Years Major Appliance Repair
Type Your Appliance Question Here...
Bob L Your Appl Pal is online now
A new question is answered every 9 seconds

What is wrong when the washer stops mid-cycle and brings up

Customer Question

What is wrong when the washer stops mid-cycle and brings up the message F 35 on the digital read-out?
Submitted: 6 years ago.
Category: Appliance
Expert:  Bob L Your Appl Pal replied 6 years ago.
If you are experiencing delays.Please check that any open or past Accept files have been processed.This will secure a more rapid answer response.

F35 is a water level error.The water level switch is faulty..To access the switch remove the top cover by removing the screws along the back of cover..Then slide cover back and off...

With the tub empty, remove the vinyl hose from the switch and blow backwards through the hose to clear any restrictions.

If the fault shows up again then you will need to replace the switch itself..

Related Appliance Questions