How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Kenmore HD 60 model#81860110...serial#093942463.. during

This answer was rated:

Kenmore HD 60 model#81860110...serial#093942463.. during warm water fill up, somtimes it stops around 1/2 full and only allows hot water to flow....and at the end of the wash cycle does not fill with cold water for rinse cycle..thank you

this means the fill valve on the cold side is failing. there are two sides to the valve one for cold and one for hot, you need to replace the valve, Part 868761the solenoid on the cold side is failing. you can order this @ thanks Bryan

Bryan and other Appliance Specialists are ready to help you

Related Appliance Questions