How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Tech Larry Your Own Question
Appliance Tech Larry
Appliance Tech Larry, Home Appliance tech
Category: Appliance
Satisfied Customers: 19183
Experience:  Over 35 years of in home appliance repair and service
14308609
Type Your Appliance Question Here...
Appliance Tech Larry is online now
A new question is answered every 9 seconds

The upper spray arm of my whirlpool Imperial SEries Quiet Partner

Resolved Question:

The upper spray arm of my whirlpool Imperial SEries Quiet Partner II is broken. The arm that holds the spinner is broken so the screw like part has nothing to stick into. Can I get a part and fix this myself?
Submitted: 6 years ago.
Category: Appliance
Expert:  Appliance Tech Larry replied 6 years ago.
Hello, I'm Larry and here to try to help you with your problem today / thanks

may i have the model number please
Customer: replied 6 years ago.

sorry i do not have it right at this time.

I can get it within the hour

 

Expert:  Appliance Tech Larry replied 6 years ago.
ok ,, let me know when you get it / thanks
Customer: replied 6 years ago.

Model # XXXXX 84 70

 

Expert:  Appliance Tech Larry replied 6 years ago.
i will need the complete model number
Customer: replied 6 years ago.

ok found it

dul200pkb1 serial number fm3007806

Expert:  Appliance Tech Larry replied 6 years ago.
is it number 13 in this picture
graphic
Customer: replied 6 years ago.
ok let me explain further I have 13 and the arm and parts under it number 14 is attached to the wire basket. Part 5 is "stripe on the top 2/3 of two sections. Also the center post of part 11 is uneven. The top edge is uneven and unfinished. I think it may be broken. It is even with the top of part 13 when i set it in together.
Expert:  Appliance Tech Larry replied 6 years ago.
you can get this all in one part and you can get it at a local appliance parts dealer near you with the model number ,, just tell them you need the center arm asm and you just hook it on the bottom of the top basket and slide the basket back in ,, it will come with instuctions to mount ,,, thanks
Appliance Tech Larry and other Appliance Specialists are ready to help you