How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

Have GE washer WJXR2080T. Washed a carpet with rubber backing

This answer was rated:

Have GE washer WJXR2080T. Washed a carpet with rubber backing that came apart and it must have clogged the pump. Any way I can fix this

If you did not include a model # XXXXX your question please do on you second reply if possible,this helps us serve you faster.


first you will need to bail the water out or you will have a mess. the front panel comes off this, heres the diagram, there are two clips on the front between the top and front panel, # XXXXX on the diagram, take a putty knife and push these up while pulling the front panel out, then lift the panel off the bottom clips, the pump will be on the right side bottom, hope this helps, thanks Bryan

Bryan and other Appliance Specialists are ready to help you